碳酸酯类电解液中Mg(NO3)2添加剂抑制锂枝晶生长的研究

在锂-硫化聚丙烯腈电池体系中,负极锂枝晶的形成和生长严重恶化了电池充放电性能,并给电池带来了安全隐患。而在更有利于稳定正极硫化聚丙烯腈材料的碳酸酯类电解液中,锂枝晶生长尤为严重。本文通过将硝酸镁添加到碳酸酯类电解液中,研究硝酸根和镁离子对锂金属表面改性的共同作用。实验数据发现,在硝酸根和镁离子共同作用下,锂枝晶生长被有效抑制。当硝酸镁浓度为100 mmol·L^-1时,锂铜半电池的库仑效率明显提高,并显著改善了锂-硫化聚丙烯腈电池的循环性能。300次循环后容量保持率为71%,远高于硝酸锂的61%和无添加剂的50%。     

Copper Nanoparticles In鄄Situ Anchored on Nitrogen鄄Doped Carbon for High鄄Efficiency Oxygen Reduction Reaction Electrocatalyst北大核心CSCD

Compared with noble metal platinum (Pt)-based catalysts, inexpensive non-noble metal electrocatalysts have attracted extensive attention for oxygen reduction reaction (ORR). Herein, chitosan as a kind of biomass resource rich in nitrogen and carbon was used to prepare nitrogen-doped carbon (N-C) and N-C in-situ anchored by copper nanoparticles (Cu/N-C). The as-obtained N-C and Cu/N-C nanoparticles were successfully used as non-noble eletrocatalysts tested for ORR. Compared with the N-C, the Cu/N-C showed the high surface area of 607.3 m2窑g-1 with the mean pore size of 2.5 nm and the pore volume of 0.40 cm3窑g-1. The most positive Gibbs free energy change was the rate determining step for ORR process with the 4e mechanism, where the value of the Cu (111)/N-C(-0.39 eV) was lower than that of the N-C(-0.26 eV). The Cu/N-C exhibited superior onset and half-wave potentials (0.96 V and 0.84 V, respectively) in alkaline media (0.1 mol窑L-1 KOH), all of which are much better than those measured for N-C and commercial Pt/C. Furthermore, the Cu/N-C showed superior methanol crossover avoidance and oxygen reduction stability. © 2021 Authors. All rights reserved.     

Enhanced Electrocatalytic Activity of Methanol and Ethanol Oxidation in Alkaline Medium at Bimetallic Nanoparticles Electrochemically Decorated Fullerene-C60 Nanocomposite Electrocatalyst: An Efficient Anode Material for Alcohol Fuel Cell Applications

Direct alcohol fuel cells (DAFCs) have been recently playing a pivotal role in electrochemical energy sources and portable electronics. Research in DAFCs has proceeded to engage major attention due to their high catalytic activity, long-term stability, portability, and low cost. Herein, we present a facile surfactant-free route to anchor bimetallic Pd−W nanoparticles supported fullerene-C₆₀ catalyst (Pd-W@Fullerene-C₆₀) for high-performance electrooxidation of alcohols (methanol & ethanol) for DAFCs applications. Structural, elemental composition, and morphological analysis of the proposed catalyst were carried out using UV-Vis spectroscopy, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM) and energy-dispersive x-ray spectroscopy (EDX). Electrochemical properties such as electrochemical activity, electrochemical active surface area (ECSA), and long-term stability of the Pd-W@Fullerene-C₆₀ catalyst for ethanol and methanol oxidation in the alkaline medium were explored by using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and chronoamperometry (CA). Results revealed that the proposed catalyst showed enlarged ECSA, tremendous electrocatalytic activity, high poison tolerance limit, good reproducibility, and enhanced long-term stability as compared to the monometallic catalyst and commercially available catalyst (Pt/C) towards ethanol and methanol oxidation reaction. This enhanced potentiality of the Pd-W@Fullerene-C₆₀ catalyst is due to the synergistic effect of W−Pd nanoparticles and excellent electron kinetic from fullerene support material. These findings strongly suggest the Pd-W@Fullerene-C₆₀ catalyst as potential anode material for the alcohol oxidation reaction.     

Nickel and Tungsten Bimetallic Nanoparticles Modified Pencil Graphite Electrode: A High-performance Electrochemical Sensor for Detection of Endocrine Disruptor Bisphenol A

In this work, an economically viable, very low cost, indigenous, ubiquitously available electrochemical sensor based on bimetallic nickel and tungsten nanoparticles modified pencil graphite electrode (NiNP-WNP@PGE) was fabricated for the sensitive and selective detection of bisphenol A (BPA). The NiNP-WNP@PGE sensor was prepared by a facile electrochemical one step co-deposition method. The prepared nanocomposite was morphologically characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX), X-ray diffraction (XRD), electrochemically by cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). The proposed sensor displayed high electrocatalytic activity towards electro-oxidation of BPA with one irreversible peak. The fabricated sensor displayed a wide detection window between 0.025 μM and 250 μM with a limit of detection of 0.012 μM. PGE sensor was successfully engaged for the detection of BPA in bottled water, biological, and baby glass samples.     

磁性分子印迹电化学传感法检测痕量奥卡西平

该文以4-乙烯基吡啶和甲基丙烯酸酯为原料制备了一种可用于检测奥卡西平（OXC）的磁性分子印迹 电化学传感器（MNPs－MIP/MCPE）。首先,依据密度泛函数理论（DFT/B3LYP/6－31 + G）计算,实验成功地 筛选和构建出 OXC与功能单体的最佳组合及比例。随后,基于沉淀聚合法合成了能够识别 OXC的磁性分子 印迹膜（MNPs－MIP）,将MNPs－MIP覆于碳糊电极（MCPE）表面制成MNPs－MIP/MCPE。采用差分脉冲伏安 法（DPV）将 MNPs－MIP/MCPE 传感器用于不同浓度 OXC 的测定。结果显示,传感器的峰电流信号随 OXC 浓 度的增大而增大,且OXC分别在5 × 10－8 ～3 × 10－6 mol/L和3 × 10－6 ～1. 5 × 10－4 mol/L浓度范围内与其峰电流 信号呈线性关系,其线性方程分别为：Ip （μA）= 1. 755 + 1. 097c（μmol/L）,相关系数（r）= 0. 999 7 和 Ip （μA）= 0. 131 + 5. 177c（μmol/L）,r = 0. 999 6。OXC的检出限（LOD = 3S/m）为2. 06 × 10－8 mol/L。该传感器成 功用于实际样品中OXC含量的检测,其回收率为99. 4%~101%,相对标准偏差（RSD）为1. 5%～2. 5%。     

基于电化学传感器检测赭曲霉毒素A的研究进展

赭曲霉毒素A(Ochratoxin A,OTA)是一种由赭曲霉、青霉菌等真菌产生的次级代谢产物,在自然界分布广泛,具有肝毒性、肾毒性、致癌、致突变作用。鉴于其危害的严重性和污染的广泛性,发展高灵敏度的OTA检测技术引起了研究者的广泛关注。该文阐述了近年来新型电化学传感技术在OTA 检测方面的发展及应用,全面综述了目前OTA电化学传感器的主要类型及其优缺点,并对其发展方向提出了展望,从而为基于OTA的电化学传感器的深入研究与应用提供了参考。     

基于Au NPs@NU-901电化学传感器检测饼干中丁基羟基茴香醚的研究

基于金属有机骨架的拓扑三维结构的高比表面积以及金纳米颗粒(Au NPS)的优异电催化活性,金纳米颗粒与金属有机框架的复合材料在电化学传感领域拥有应用潜力。该文成功合成了Au NPs@NU-901复合材料,并采用透射电镜、X射线衍射、红外光谱以及X射线光电子能谱对其进行表征。采用线性扫描伏安法和差分脉冲伏安法研究了复合材料对丁基羟基茴香醚(BHA)电化学氧化反应的催化能力。结果表明,Au NPs@NU-901对BHA的电化学氧化具有较好的催化能力。基于Au NPs@NU-901制备电化学传感器用于BHA的定量检测,BHA的氧化峰电流与其浓度在0.10~50 μmol/L范围内呈现良好线性关系,相关系数(r2)为0.994 8,检出限(S/N=3)为0.049 μmol/L,相对标准偏差(RSD)为3.6%。将该传感器应用于饼干样品中BHA的检测,加标回收率为95.6%~104%,样品检测结果与高效液相色谱法的测定结果吻合。方法的选择性好、灵敏准确,适合于饼干中BHA的检测。     

端粒酶活性检测研究进展

端粒酶活性检测方法经过近30年的不断改革与发展,取得了巨大突破。该文重点综述了近3年的端粒酶活性检测方法,其中包括化学反应发光法、电化学法、荧光分析法、比色法等,旨在更加全面地了解目前端粒酶活性检测的研究进展,为设计新的端粒酶活性检测方法和克服端粒酶活性检测方法在临床试验中的挑战提供思路。     

基于多肽识别的电化学生物传感技术

多肽具有分子量小、易于合成、生物兼容性好、稳定性高及序列灵活多样等优点。因此,多肽作为新型生物识别元件,已被广泛应用于生物传感器的构建。电化学分析灵敏度高、准确度好、设备简单、检测范围广且易于操作。本文介绍了基于多肽识别的电化学生物传感器技术,包括多肽的修饰与固定化、多肽与待测物的识别及检测原理;综述了近五年多肽电化学生物传感器对重金属离子、小分子、蛋白质、细菌和病毒的检测;展望了肽基电化学生物传感器的发展趋势。     

熔盐法合成电化学性能优异的富锂层状正极材料Li_(1.5)Ni_(0.25)Mn_(0.75)O_(2.5)

采用氢氧化物共沉淀和熔盐法相结合的方法制备得到了电化学性能优异的富锂锰基Li_(1.5)Ni_(0.25)Mn_(0.75)O_(2.5)正极材料。借助X射线衍射(XRD)分析、扫描电镜(SEM)、感应耦合等离子体原子发射光谱(ICP-AES)、X射线光电子能谱(XPS)、电化学阻抗谱(EIS)和恒电流充放电测试等表征手段对材料的颗粒形貌、晶体结构和电化学性能进行了系统研究。XRD结果表明该材料具有完善的α-NaFeO2层状结构(空间群为R3m)和较低的Li~+/Ni~(2+)阳离子混排。电化学性能测试表明该材料的首次不可逆容量损失较小,且倍率性能和循环稳定性能十分优异。具体而言,在2.0~4.8V,0.1C时的首次不可逆容量损失为50mAh·g~(-1)(首次库伦效率84%);在10C时的放电比容量还能达到102mAh·g~(-1);在0.5C下循环100次后,放电比容量为205mAh·g~(-1)(容量保持率90%)。